Fulgor-milano CPH 401 ID X User Manual download pdf (Page 16)

16 17

GB

Operating principle

This is based on the electromagnetic

properties of most cooking containers.

The electronic circuit governs the operation

of the coil (inductor), creating a magnetic

ﬁeld.

The heat is transmitted by the container to

the food.

Te cooking process takes place as follows:

- minimum dispersion (high performance);

- the removal of the pan (simply lifting it)

automatically stops the system;

- the electronic system allows maximum

ﬂexibility and precision of regulation.

Installation

All installation operations (electrical

connection) must be carried out by people

qualiﬁed in compliance with the laws in

force.

For speciﬁc instructions, see the installation

section.

Important

This apparatus is not suitable for use by

person (children included) with reduced

mental and physical capacity or with lack of

experience and knowledge unless having

previously received suitable training fot its

use by persons responsable for their safety.

It must be ensured that children do not play

with the apparatus.

Use

First of all, position the pan in the chosen

cooking area.

The absence of the pan display means

the system cannot start.

Cooking and power levels

The cooking and power levels of the

cooking zones are shown on the display

with 7 allotted segments. In accordance with

standards, the power levels are displayed

with numbers from “1” to “9”.

Residual heat indicator

Indicates to the user that the glass is at

a dangerous temperature if in contact

with the area over the cooking zone. The

temperature is determined by means of a

mathematical model and possible residual

heat is indicated by “H” on the corresponding

7 segment display.

Heating and cooling are calculated based

on:

- The selected power level (from “0” to “9”);

- The relay activation time after the cooking

zone has been switched off.

The corresponding display shows “H” until

the zone temperature drops below the

critical level (< 60 °C) according to the

mathematical model.

Turning the cooking surface on

and off

The electronics are activated by turning

the knob. You will hear a short beep. A

display in the glass front shows the setting

of the cooking surface (a value from 0-9

proportional to the rotation of the knob) or

the symbol “u”, meaning there is no pan, “H”

for residual heat an error message.

If a suitable pan is not placed on the cooking

surface within 10 minutes after turning the

knob, surface will go into standby mode with

the display turned off and there will be a

short beep; to use the cooking in this mode,

you have to turn the knob back to position

0 and, while you are turning it, the display

will show “-”.

User instructions

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

Comments to this Manuals

No comments